P-08 ????

John Sabato · 12-02-2002, 04:39 PM

If you can move the toggle a whole inch, does the slide move back in the frame during this movement?

If the slide moves even a half inch, you should be able to open the takedown lever and remove the upper half... If you can't, then keep using penetration oil until you can.

If you use plenty of penetration oil and let it soak a couple of days you should be able to get slide movement by holding the frame in your hand and striking the muzzle with a large rubber mallet that will cause no harm. Once it moves you are on your way to disassembly...

The gunsmith will only be necessary if you don't feel like taking your time and doing the work yourself.

Keep at it and let us know how you make out.

12-02-2002, 04:39 PM	#11
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	If you can move the toggle a whole inch, does the slide move back in the frame during this movement? If the slide moves even a half inch, you should be able to open the takedown lever and remove the upper half... If you can't, then keep using penetration oil until you can. If you use plenty of penetration oil and let it soak a couple of days you should be able to get slide movement by holding the frame in your hand and striking the muzzle with a large rubber mallet that will cause no harm. Once it moves you are on your way to disassembly... The gunsmith will only be necessary if you don't feel like taking your time and doing the work yourself. Keep at it and let us know how you make out. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode