ground chamber

John Sabato · 12-04-2002, 01:22 PM

For the benefit of those who may be wondering what Dieter means by "release lever"... I am pretty sure he is talking about the sear bar and the fact that it was relieved to allow opening of the toggle with the safety on in 1916. After 1916, these sear bars were made in the modified form. Prior to this time the toggle could not be raised with the safety applied.

This excellent illustration from Gerard Henrotin's E-Book on DWM Lugers shows how the sear machining differed after the design change. The top sear is pre-1916 and the lower sear shows how the position of the angle on the left side was relieved to allow the toggle to open with the safety on.

12-04-2002, 01:22 PM	#11
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,309 Times in 1,098 Posts	For the benefit of those who may be wondering what Dieter means by "release lever"... I am pretty sure he is talking about the sear bar and the fact that it was relieved to allow opening of the toggle with the safety on in 1916. After 1916, these sear bars were made in the modified form. Prior to this time the toggle could not be raised with the safety applied. This excellent illustration from Gerard Henrotin's E-Book on DWM Lugers shows how the sear machining differed after the design change. The top sear is pre-1916 and the lower sear shows how the position of the angle on the left side was relieved to allow the toggle to open with the safety on. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode