Regarding Virtue

Doubs · 09-07-2002, 08:41 PM

Just a suggestion, but before I tried fire-lapping, I'd use "J-B Bore Bright". It is also available from Brownells. A worn bronze brush is used with a patch wrapped around it. The Bore Bright is applied to the patch and then inserted from the chamber end. It'll be a tight fit in the bore. A total of 40 - 60 strokes are made. The results are about what you'd get from lapping. I'm completely sold on the stuff.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-07-2002, 08:41 PM	#6
Doubs User Join Date: Jun 2002 Location: Byron, Georgia Posts: 1,745 Thanks: 828 Thanked 1,794 Times in 592 Posts	Just a suggestion, but before I tried fire-lapping, I'd use "J-B Bore Bright". It is also available from Brownells. A worn bronze brush is used with a patch wrapped around it. The Bore Bright is applied to the patch and then inserted from the chamber end. It'll be a tight fit in the bore. A total of 40 - 60 strokes are made. The results are about what you'd get from lapping. I'm completely sold on the stuff.