![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
![]() |
#4 |
Lifer
Lifetime Forum Patron Join Date: Apr 2015
Location: Austin, Texas
Posts: 751
Thanks: 2,158
Thanked 630 Times in 340 Posts
|
![]()
remove the right grip first, using your finger from inside of the magazine well.
Then carefully remove the left one. Be careful not to crack or chip it near the safety lever. Glad to hear the small part is numbered "91" and just doesn't show up well in the photo. That happens a lot. While the grips are off, you can go over the entire gun with a light gun oil. That should be enough to clean off any left over gum, grease or old oil. BALLISTOL is an excellent cleaning and preservative product that works well for the pistol and grips. If you are only going to own one Luger, this would be the model to have. It is iconic and was only produced for a few years before an during WW-1. The finish is nearly gone, but having all matching parts is much more important. This is the same make and model luger that I first bought for my own small collection. |
![]() |
![]() |
The following 3 members says Thank You to Mac Cat for your post: |
Thread Tools | |
Display Modes | |
|
|