Newbie, Thrown Into The Luger World By Accident

[Doubs]

Originally Posted by day late

I am using this to aid me.

https://www.americanrifleman.org/con...-luger-pistol/

You have mentioned the sear. This view of a PO8 doesn't show any part called a sear. By number, which part are you talking about?

Items 6 through 10 comprise the sear bar assembly plus the spring. I suppose it would have been less confusing if I had used the technical terminology "trigger bar". My apologies.

If you look down the left channel inside of the receiver wall with the toggle assembly removed, you'll see the sear on the trigger bar sticking out.

While you're inspecting it, check to make sure that the sear hasn't been filed down. Also check the firing pin to see if it's been filed. While I doubt that's the case, sometimes someone tries to improve the trigger by filing those parts and goes too far.