One way to find out?

G.T. · 11-18-2021, 10:53 AM

I was hot on it until my spring company was sold off and my inside guy let go! I receintly tried to re-connect with the company and they wouldn't even talk to me about a small run, not to mention test runs until it would be correct? I've found the Wolfe springs to be satisfactory, although I still prefer original mauser WW2 for the 9mm. The .30 Luger are a crap shoot of used springs I can find here or there... One thing I always do with a new spring is mount it in a drill press and compress it fully a few times, this sets the spring and reduces its free length about 1/5 so it is easier to install... Best to all,til...lat'r....GT..

11-18-2021, 10:53 AM	#3
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,541 Thanks: 1,342 Thanked 3,743 Times in 1,020 Posts	Hi Bob I was hot on it until my spring company was sold off and my inside guy let go! I receintly tried to re-connect with the company and they wouldn't even talk to me about a small run, not to mention test runs until it would be correct? I've found the Wolfe springs to be satisfactory, although I still prefer original mauser WW2 for the 9mm. The .30 Luger are a crap shoot of used springs I can find here or there... One thing I always do with a new spring is mount it in a drill press and compress it fully a few times, this sets the spring and reduces its free length about 1/5 so it is easier to install... Best to all,til...lat'r....GT..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode