mystery hybrid Luger

mrerick · 07-07-2021, 10:07 AM

Was this pistol plated, or is that a reflective blued surface where it isn't damaged?

Look closely at the front of the frame, and you'll see that the receiver is slightly proud of the frame surface. That often indicates something has been ground and renumbered.

A 1940 dated receiver would not have gothic "S" marked parts from the factory.

The widespread corrosion of this depth makes me wonder if this was dug from the ground? If not, it must have been in a humid environment for years - or intentionally corroded.

Finally, look closely at the proof acceptance eagle on the receiver.

07-07-2021, 10:07 AM	#19
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,925 Thanks: 1,377 Thanked 3,139 Times in 1,520 Posts	Was this pistol plated, or is that a reflective blued surface where it isn't damaged? Look closely at the front of the frame, and you'll see that the receiver is slightly proud of the frame surface. That often indicates something has been ground and renumbered. A 1940 dated receiver would not have gothic "S" marked parts from the factory. The widespread corrosion of this depth makes me wonder if this was dug from the ground? If not, it must have been in a humid environment for years - or intentionally corroded. Finally, look closely at the proof acceptance eagle on the receiver. __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode