1939 Luger code 42

Frank · 04-17-2003, 10:59 AM

Hello Jack, the extractor should be numbered, the ejector should not. I agree with Lugerdoc on the grips. I don't see any Erfurt Marks on the firing pin, Tom. At least in the view marked "FP". I cleaned the photo up a bit and all I see is the "39".

If I had to guess, the extractor is either an armorer's replacement or a commercial. It left the factory with a numbered extractor!

Hope this helps

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-17-2003, 10:59 AM	#5
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	Hello Jack, the extractor should be numbered, the ejector should not. I agree with Lugerdoc on the grips. I don't see any Erfurt Marks on the firing pin, Tom. At least in the view marked "FP". I cleaned the photo up a bit and all I see is the "39". If I had to guess, the extractor is either an armorer's replacement or a commercial. It left the factory with a numbered extractor! Hope this helps