Shoulder set-back .30 Luger

Rickybill · 01-04-2020, 12:01 PM

Thanks for the replies.
I'd never had an issue before trying the 90gr XTP, which appears identical to the 85, except for length, so I didn't have to adjust seating depth, the diameter is the same as the 85s; the only difference, externally, is lack of roll crimp with the 90s.
I have to feed the .311" 85s through a sizer, and was hoping to skip that step by using the 90s, but the 85s have worked for years, so, as dad used to say, "DFTP"; don't fight the problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-04-2020, 12:01 PM	#6
Rickybill User Join Date: Aug 2018 Posts: 25 Thanks: 0 Thanked 12 Times in 6 Posts	Thanks for the replies. I'd never had an issue before trying the 90gr XTP, which appears identical to the 85, except for length, so I didn't have to adjust seating depth, the diameter is the same as the 85s; the only difference, externally, is lack of roll crimp with the 90s. I have to feed the .311" 85s through a sizer, and was hoping to skip that step by using the 90s, but the 85s have worked for years, so, as dad used to say, "DFTP"; don't fight the problem.