upload photo | donate | calendar
|
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
07-26-2019, 05:19 PM
|
#1 |
|
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,443
Thanked 4,355 Times in 2,041 Posts
|
With the toggle train removed from the pistol, and the striker(firing pin) fully forward and projecting from the bolt face; place the legs of the 1.35mm side on each side of the protruding pin and move it across the pin, the pin should pass without touching-if it does the protrusion is ok; if it touches the pin, then the pin is protruding too much, and should be shortened till it will pass.
Now turn the tool around and use the 1.1mm side, it should not pass over the exposed tip of the striker, if it does the striker is too short. The striker should have a smooth, rounded tip; in addition to being the correct length. You can do the test quicker than I can type "how". 
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
|
|
| The following 9 members says Thank You to DonVoigt for your post: |
|
07-27-2019, 07:44 AM
|
#2 |
|
User
Join Date: Jan 2019
Location: Pa.
Posts: 157
Thanks: 535
Thanked 338 Times in 90 Posts
|
F/P tool info
Thanks Don for all your time and effort.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
