New to me 1920 DWM nickel plated

DonVoigt · 06-09-2019, 10:08 PM

The 388 on the barrel is "8,88" the actual bore diameter.

The picture of the grip makes me a little dizzy; but the tab may also be broken and a little short.
I really can't make out the length of the spring.

lugerdoc on this board can help you with a spring.

Laf · 06-09-2019, 10:25 PM

I've taken a couple more pictures. The spring is about 16.5mm from the tip to the end. The tab on the grip is about 3mm wide. It's not long enough to contact the grip safety tab. Thanks for the suggestion about Lugerdoc, I'll ask if he's got a spring for sale.
Alan

06-09-2019, 10:08 PM	#1
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,443 Thanked 4,355 Times in 2,041 Posts	The 388 on the barrel is "8,88" the actual bore diameter. The picture of the grip makes me a little dizzy; but the tab may also be broken and a little short. I really can't make out the length of the spring. lugerdoc on this board can help you with a spring. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

06-09-2019, 10:25 PM	#2
Laf User Join Date: Jun 2019 Posts: 6 Thanks: 0 Thanked 2 Times in 2 Posts	I've taken a couple more pictures. The spring is about 16.5mm from the tip to the end. The tab on the grip is about 3mm wide. It's not long enough to contact the grip safety tab. Thanks for the suggestion about Lugerdoc, I'll ask if he's got a spring for sale. Alan Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode