What To Do With A Wet Luger?

Vlim · 08-31-2017, 11:14 AM

Remove the grips and chuck it in a bucket of oil. The luger, not the grips and the holster.

Let the grips air dry. Forced drying may crack them.

If the pistol was in the water a short time, it may be ok, but expect major rust issues if it spent a lot of time in the water. Not much can be done, except removal of active rust. Marks will be left and the gun will never return to what it once was.

Come to think of it:
When the grips are removed and the pistol is submerged in an oil bath in a closed container, that should give it good protection against flooding for a while? Even storing it in an air tight (vacuum) enclosure should work?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-31-2017, 11:14 AM	#1
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,990 Times in 1,205 Posts	Remove the grips and chuck it in a bucket of oil. The luger, not the grips and the holster. Let the grips air dry. Forced drying may crack them. If the pistol was in the water a short time, it may be ok, but expect major rust issues if it spent a lot of time in the water. Not much can be done, except removal of active rust. Marks will be left and the gun will never return to what it once was. Come to think of it: When the grips are removed and the pistol is submerged in an oil bath in a closed container, that should give it good protection against flooding for a while? Even storing it in an air tight (vacuum) enclosure should work?