Winchester Ammo Incident

gunbugs · 04-30-2017, 04:07 AM

It was first, a 40 cal S&W, a cartridge known to operate at high chamber pressures. It blew out at the feed ramp and extractor cut, the unsupported portion of the barrel/chamber. High pressure? Maybe. Another possibility is a poorly formed and drawn case, with a defective web. I don't buy into the "double charge" theory. A double, in my experience, would have caused more damage at the chamber. This blew the case, and vented into the magazine well, cracking the plastic frame, and popping some other parts loose. I think it was a bad piece of brass.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-30-2017, 04:07 AM	#1
gunbugs Lifetime Forum Patron Join Date: Sep 2013 Location: Fairbanks, Alaska. Home of the best moose. Posts: 683 Thanks: 375 Thanked 1,228 Times in 415 Posts	It was first, a 40 cal S&W, a cartridge known to operate at high chamber pressures. It blew out at the feed ramp and extractor cut, the unsupported portion of the barrel/chamber. High pressure? Maybe. Another possibility is a poorly formed and drawn case, with a defective web. I don't buy into the "double charge" theory. A double, in my experience, would have caused more damage at the chamber. This blew the case, and vented into the magazine well, cracking the plastic frame, and popping some other parts loose. I think it was a bad piece of brass.