Franken-Luger

John Sabato · 03-10-2017, 01:54 PM

Your disconnector seems to be missing the spring? This spring is essential to proper operation. Your sideplate is also suspect. If you know someone local who owns a Luger P.08, you can try swapping these parts to see if the problems go away...

LugerDoc should have any parts you might need.

rdfact · 03-10-2017, 02:42 PM

Quote:

Originally Posted by John Sabato

Your disconnector seems to be missing the spring? This spring is essential to proper operation. Your sideplate is also suspect. If you know someone local who owns a Luger P.08, you can try swapping these parts to see if the problems go away...

LugerDoc should have any parts you might need.

Please correct me if I am using the wrong terminology. This part is the sear bar, correct? The plunger tip has broken off. There is a spring inside the sear bar with the rest of the plunger held in by a pin.

And should the trigger lever in the side plate have a spring? Mine does not and it just flops around. The "S" shaped pin holds the trigger lever to the side plate but it has no spring tension.
Thanks.

03-10-2017, 01:54 PM	#1
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,155 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Your disconnector seems to be missing the spring? This spring is essential to proper operation. Your sideplate is also suspect. If you know someone local who owns a Luger P.08, you can try swapping these parts to see if the problems go away... LugerDoc should have any parts you might need. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode