Luger Grip Screw Thread Size

CAP Black · 03-03-2017, 02:59 PM

Why would it matter to you? Do you want to know the
history of industry in
Europe from the 1700s?
That would be a lot to learn. Many people that come up against this during current times have the same bewilderment.
Let it go.
Also read the thread above and get a portion of it.
Jack

Zorba · 03-05-2017, 10:29 PM

Quote:

Originally Posted by CAP Black

Do you want to know the history of industry in Europe from the 1700s? That would be a lot to learn

Yes, as a matter of fact!

Such things interest me.

Kiwi Mark · 09-01-2017, 11:38 PM

I have made grips screw by screw cutting the lathe. At the time, I found them to be 0.010" under 5mm and 0.8mm pitch. Just checked my taping chart and they are 3/16 x 32 tpi or 3/16 BSF.
Yes, I know, what are the very clever Germans using a Englander thread. That I don't know??
Maybe a Reasonable Knownable Person can answer??

03-03-2017, 02:59 PM	#1
CAP Black User Join Date: Dec 2008 Location: Fairmont, WV Right here in Mountaineer country and God's country Posts: 767 Thanks: 100 Thanked 174 Times in 96 Posts	Why would it matter to you? Do you want to know the history of industry in Europe from the 1700s? That would be a lot to learn. Many people that come up against this during current times have the same bewilderment. Let it go. Also read the thread above and get a portion of it. Jack Last edited by CAP Black; 03-03-2017 at 03:00 PM. Reason: add info.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-01-2017, 11:38 PM	#3
Kiwi Mark User Join Date: Jan 2017 Posts: 23 Thanks: 0 Thanked 7 Times in 6 Posts	I have made grips screw by screw cutting the lathe. At the time, I found them to be 0.010" under 5mm and 0.8mm pitch. Just checked my taping chart and they are 3/16 x 32 tpi or 3/16 BSF. Yes, I know, what are the very clever Germans using a Englander thread. That I don't know?? Maybe a Reasonable Knownable Person can answer??