Erma conversion kit- long box reproduction

[sheepherder]

Originally Posted by Olle

One way to get around that is to work with an oversized blank, and true it up once all the cuts are made.

+ 1

My thought was to wait a couple weeks/months, and then plane it flat. My pine box was just a 'feasibility study' to see if it was difficult/time consuming/boring. If it was something that would ultimately interest me, I would step up to maple or walnut.

It's good that Don is making these!

[DonVoigt]

Originally Posted by sheepherder

+ 1

My thought was to wait a couple weeks/months, and then plane it flat. My pine box was just a 'feasibility study' to see if it was difficult/time consuming/boring. If it was something that would ultimately interest me, I would step up to maple or walnut.

It's good that Don is making these!

Actually the pine is fine, no change or warping.
I "fixed" several small boxes last year that had warped, had to sand them flat, then deepen the cut outs.

Ollie is right about the stress, happens with metal too. That is why it has to be annealed and equalized for some applications.

The wood is not that big a deal - it can be "fixed".