My New Luger

Dalet · 10-08-2016, 05:20 PM

Hello... I am new to the forum as of yesterday, so be kind, and I hope that this is the correct section to begin as I could not find a "New to Form" section.

I inherited the Luger from my dad who got it from his Uncle Jimmy who came back from WWII with it. Same story as everyone else, I know, but I believe it to be true because great uncle Jimmy said so!

I shot it as a kid in the late fifties and sixties, and it has been used minimally since the sixties! A thorough cleaning has revealed that the hold open spring is missing, and it appears to be a well used gun that should be used rather than preserved.

The top of the receiver is stamped with 1936 and S/42 is on the middle toggle. The SN is 6345 with an 8,S2 under it. There are three marks on the front right of the receiver; two drooped wing eagles, and what appears to be a stick figure eagle with upward reaching arms and downward lines like wing feathers.

I also have what appears to be an original holster with the letters G. B. stamped on the inside of the flap!

Any help in identifying this gun would be appreciated, as it does have sentimental value, and I would like to take it to the gun club and shoot it and talk story!

Edward Tinker · 10-08-2016, 06:15 PM

welcome to the forum

I moved this to the New Collector area.

Pictures are needed to help get beyond the obvious

1936 (year made) - S/42 - Code name for Mauser - eagles on the right are two acceptance markings and one proof marking

Not sure about holster, pictures needed

Ed

Dalet · 10-08-2016, 06:51 PM

Thanks Ed - I guess both my mind and eyes are going bad at the same time. I will get pics up tomorrow. Thanks Dale

mrerick · 10-09-2016, 11:05 AM

Hi Dalet and welcome to the forum.

You can learn quite a bit from our reference FAQ pdf. Download it from:

http://forum.lugerforum.com/showthread.php?t=13121

Replacement hold open springs are available. They are small and thin, but with care you can replace it yourself. I am sure LugerDoc has them in stock.

Post some pictures when you can, we can be of more help after getting a good look at your pistol.

And don't store it inside the holster. Keep them separate.

In addition to "6345" there should be a suffix letter under the numeric digits on the front of the frame above the trigger guard. That suffix letter is part of the serial number. The "8.82" is a bore measurement representing 9mm Luger caliber. S/42 was Mauser's military concealment code.

If it's all matching, realize that breaking a numbered part during shooting would reduce it's historic and financial value. That said, the Mauser made Lugers had excellent metallurgy and make good shooters.

rhuff · 10-09-2016, 01:14 PM

Welcome to the forum Dalet. I believe that you will find this forum to be quite respectful to new(and old) members. There is a phenomenal amount of Luger knowledge on this forum, and the folks are more than happy to share it with others. You found the correct spot.

Dalet · 10-09-2016, 02:28 PM

Thank you for the kind welcome!

I will post pics as soon as I can figure out how to download them to my computer. It seems that IOS and Windows do not want to play nice after their respective 10.0 upgrades.

Thanks again
Dale

10-08-2016, 05:20 PM	#1
Dalet New User Join Date: Oct 2016 Location: San Diego, California Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	My New Luger Hello... I am new to the forum as of yesterday, so be kind, and I hope that this is the correct section to begin as I could not find a "New to Form" section. I inherited the Luger from my dad who got it from his Uncle Jimmy who came back from WWII with it. Same story as everyone else, I know, but I believe it to be true because great uncle Jimmy said so! I shot it as a kid in the late fifties and sixties, and it has been used minimally since the sixties! A thorough cleaning has revealed that the hold open spring is missing, and it appears to be a well used gun that should be used rather than preserved. The top of the receiver is stamped with 1936 and S/42 is on the middle toggle. The SN is 6345 with an 8,S2 under it. There are three marks on the front right of the receiver; two drooped wing eagles, and what appears to be a stick figure eagle with upward reaching arms and downward lines like wing feathers. I also have what appears to be an original holster with the letters G. B. stamped on the inside of the flap! Any help in identifying this gun would be appreciated, as it does have sentimental value, and I would like to take it to the gun club and shoot it and talk story! Last edited by Edward Tinker; 10-08-2016 at 06:13 PM.

10-08-2016, 06:15 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	welcome to the forum I moved this to the New Collector area. Pictures are needed to help get beyond the obvious 1936 (year made) - S/42 - Code name for Mauser - eagles on the right are two acceptance markings and one proof marking Not sure about holster, pictures needed Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

10-09-2016, 11:05 AM	#4
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	Hi Dalet and welcome to the forum. You can learn quite a bit from our reference FAQ pdf. Download it from: http://forum.lugerforum.com/showthread.php?t=13121 Replacement hold open springs are available. They are small and thin, but with care you can replace it yourself. I am sure LugerDoc has them in stock. Post some pictures when you can, we can be of more help after getting a good look at your pistol. And don't store it inside the holster. Keep them separate. In addition to "6345" there should be a suffix letter under the numeric digits on the front of the frame above the trigger guard. That suffix letter is part of the serial number. The "8.82" is a bore measurement representing 9mm Luger caliber. S/42 was Mauser's military concealment code. If it's all matching, realize that breaking a numbered part during shooting would reduce it's historic and financial value. That said, the Mauser made Lugers had excellent metallurgy and make good shooters. __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-08-2016, 06:51 PM	#3
Dalet New User Join Date: Oct 2016 Location: San Diego, California Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks Ed - I guess both my mind and eyes are going bad at the same time. I will get pics up tomorrow. Thanks Dale

10-09-2016, 01:14 PM	#5
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,308 Thanks: 2,737 Thanked 993 Times in 729 Posts	Welcome to the forum Dalet. I believe that you will find this forum to be quite respectful to new(and old) members. There is a phenomenal amount of Luger knowledge on this forum, and the folks are more than happy to share it with others. You found the correct spot.

10-09-2016, 02:28 PM	#6
Dalet New User Join Date: Oct 2016 Location: San Diego, California Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Thank you for the kind welcome! I will post pics as soon as I can figure out how to download them to my computer. It seems that IOS and Windows do not want to play nice after their respective 10.0 upgrades. Thanks again Dale