How many of you shoot your numbers matching Old Models?

spacecoast · 08-31-2016, 09:44 AM

Loose grips...

If you're too lazy to do epoxy (like I am), I've had some luck using a small amount of high temperature hot glue to build up the areas of the underside of the grip that might be chipped off. Then, if you press it into the frame before it completely cools, it will mold itself to the frame and you can get a nice tight fit.

ithacaartist · 08-31-2016, 04:18 PM

Quote:

Originally Posted by spacecoast

Loose grips...

If you're too lazy to do epoxy (like I am), I've had some luck using a small amount of high temperature hot glue to build up the areas of the underside of the grip that might be chipped off. Then, if you press it into the frame before it completely cools, it will mold itself to the frame and you can get a nice tight fit.

A good idea! I do the same thing with the epoxy when it cures enough to not be runny, but still plastic, after wrapping the frame in a layer of Handi Wrap.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-31-2016, 09:44 AM	#1
spacecoast User Join Date: Dec 2013 Location: FL and PA Posts: 332 Thanks: 276 Thanked 243 Times in 109 Posts	Loose grips... If you're too lazy to do epoxy (like I am), I've had some luck using a small amount of high temperature hot glue to build up the areas of the underside of the grip that might be chipped off. Then, if you press it into the frame before it completely cools, it will mold itself to the frame and you can get a nice tight fit.