DATA REQUEST for 42 byf Lugers - Page 13

CaliforniaPerspective · 11-18-2014, 10:22 AM

Awesome! Thanks!

vonfranco · 12-22-2014, 11:38 PM

mine is 4752 I . no bore ga. #s. can you tell me anything about it? it has aluminum magazine and number matching walnut grips. Thanks Frank

Frank · 12-23-2014, 10:56 AM

Hi vonfranco, byf 42, serial number 4752i was completed about June 1942. The correct magazine is a fxo type with either aluminum or black plastic bottom un-numbered.

Thanks for the data.

MrHat102 · 02-09-2015, 08:22 PM

Newbie here.

5834F
No gauge numbers I see.
Love the markings on the holster.
Same old questions. What do I have? Is it German Military?

Thank you, Marvin

Frank · 02-10-2015, 11:00 AM

MrHat, Thanks for the info. Looks like a nice one !!!

kpf · 02-13-2015, 04:44 PM

Hello

A 42 byf ser 4700 b no bore gauge came in today.

Regards

Kai
Norway

Frank · 02-13-2015, 05:58 PM

kpf, thanks for the information. Your 42 byf, serial number 4700b should have a bore gage. Is it possible the pistol was rebarreled?

I have a 41 byf, Z-Block the doesn't have a bore gage, so your Luger might be correct. Please let me know.

kpf · 02-14-2015, 04:36 AM

Hello Frank

I don't think so the number 4700 is at the correct place!

Regards

Kai

Frank · 02-14-2015, 09:35 AM

kpf, it just could be mistake or a pistol that was rebarreled at a later date. Let us call it a good one!! Thanks again!

kpf · 02-14-2015, 05:32 PM

I will post picture tomorrow.

Regards

Kai

kpf · 02-15-2015, 05:25 PM

http://forum.lugerforum.com/attachme...1&d=1424039068

Frank · 02-15-2015, 06:09 PM

kpf, the suffix on your 42 byf is "D", not "B". So it shouldn't have any bore gage on the barrel. Thanks for the pictures!!

kpf · 02-16-2015, 03:50 AM

Oh sorry, post the nr from the memory. ;-))

Joe Inabnett · 08-05-2016, 07:26 PM

I recently bought a 42 byf, which is Russian dipped and stamped as import on the barrel. The Serial no is 116 l and frame is marked E/135 E/135 and eagle. The barrel is marked 116, but no chamber dimensions. Maybe a new barrel as it has stamped "luger P.08 9mm Germany" and imported by CAI***. When I inspected it found a replacement firing pin and sunburst markings on trigger guard. It shoots o.k. but I got a used mauser firing pin from Tom Heller. Haven't tried the mauser firing pin, but I do not expect any problem. Joe Inabnett

Mac Cat · 08-05-2016, 10:43 PM

my "42" byf S/N 2011l; no bore gauge
sent PM

Joe Inabnett · 08-06-2016, 10:27 AM

I shot my byf 42 luger today with replacement mauser firing pin. No 611 l performs perfectly, recycles and is accurate for my short test fire. This is a Vopo rework with sunburst stamping. I am happy with this latest addition. Joe Inabnett

Lugerdoc · 08-07-2016, 09:01 AM

Joe, Happy to learn that all is well with the new FP. Your pistol was among the last sent to the German army, as most in the m and N suffix blocks went to Portugal on contract. TH

Joe Inabnett · 08-07-2016, 03:46 PM

Lugerdoc For your info, I also test fired the vopo replacement FP, which had a slightly different appearance than the standard mauser. It too fired consistently, but I am keeping the Mauser F.P. as more original to the 42 byf. Thanks for your help. Joe

JZ1018 · 09-05-2016, 02:49 AM

Serial number 3581e
no bore gage

Tman07 · 09-05-2016, 06:53 PM

I have 42 byf, 2720 L with no bore gage.
Regards, Dave

02-09-2015, 08:22 PM	#244
MrHat102 User Join Date: Feb 2015 Location: Southern Ca Posts: 8 Thanks: 0 Thanked 2 Times in 1 Post	Newbie here. 5834F No gauge numbers I see. Love the markings on the holster. Same old questions. What do I have? Is it German Military? Thank you, Marvin Attached Thumbnails Last edited by MrHat102; 02-10-2015 at 08:43 AM. Reason: Pictures

02-15-2015, 05:25 PM	#251
kpf User Join Date: Oct 2012 Location: Finnøy, Norway Posts: 75 Thanks: 78 Thanked 36 Times in 10 Posts	http://forum.lugerforum.com/attachme...1&d=1424039068 Attached Thumbnails

08-05-2016, 07:26 PM	#254
Joe Inabnett User Join Date: Jan 2008 Location: New Orleans, LA Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	I recently bought a 42 byf, which is Russian dipped and stamped as import on the barrel. The Serial no is 116 l and frame is marked E/135 E/135 and eagle. The barrel is marked 116, but no chamber dimensions. Maybe a new barrel as it has stamped "luger P.08 9mm Germany" and imported by CAI***. When I inspected it found a replacement firing pin and sunburst markings on trigger guard. It shoots o.k. but I got a used mauser firing pin from Tom Heller. Haven't tried the mauser firing pin, but I do not expect any problem. Joe Inabnett __________________ Slo Joe

08-06-2016, 10:27 AM	#256
Joe Inabnett User Join Date: Jan 2008 Location: New Orleans, LA Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	I shot my byf 42 luger today with replacement mauser firing pin. No 611 l performs perfectly, recycles and is accurate for my short test fire. This is a Vopo rework with sunburst stamping. I am happy with this latest addition. Joe Inabnett __________________ Slo Joe

08-07-2016, 09:01 AM	#257
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Joe, Happy to learn that all is well with the new FP. Your pistol was among the last sent to the German army, as most in the m and N suffix blocks went to Portugal on contract. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

11-18-2014, 10:22 AM	#241
CaliforniaPerspective New User Join Date: Nov 2014 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Awesome! Thanks!

12-22-2014, 11:38 PM	#242
vonfranco User Join Date: Dec 2014 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	mine is 4752 I . no bore ga. #s. can you tell me anything about it? it has aluminum magazine and number matching walnut grips. Thanks Frank

12-23-2014, 10:56 AM	#243
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	Hi vonfranco, byf 42, serial number 4752i was completed about June 1942. The correct magazine is a fxo type with either aluminum or black plastic bottom un-numbered. Thanks for the data.

02-10-2015, 11:00 AM	#245
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	MrHat, Thanks for the info. Looks like a nice one !!!

02-13-2015, 04:44 PM	#246
kpf User Join Date: Oct 2012 Location: Finnøy, Norway Posts: 75 Thanks: 78 Thanked 36 Times in 10 Posts	Hello A 42 byf ser 4700 b no bore gauge came in today. Regards Kai Norway

02-13-2015, 05:58 PM	#247
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	kpf, thanks for the information. Your 42 byf, serial number 4700b should have a bore gage. Is it possible the pistol was rebarreled? I have a 41 byf, Z-Block the doesn't have a bore gage, so your Luger might be correct. Please let me know.

02-14-2015, 04:36 AM	#248
kpf User Join Date: Oct 2012 Location: Finnøy, Norway Posts: 75 Thanks: 78 Thanked 36 Times in 10 Posts	Hello Frank I don't think so the number 4700 is at the correct place! Regards Kai

02-14-2015, 09:35 AM	#249
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	kpf, it just could be mistake or a pistol that was rebarreled at a later date. Let us call it a good one!! Thanks again!

02-14-2015, 05:32 PM	#250
kpf User Join Date: Oct 2012 Location: Finnøy, Norway Posts: 75 Thanks: 78 Thanked 36 Times in 10 Posts	I will post picture tomorrow. Regards Kai

02-15-2015, 06:09 PM	#252
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	kpf, the suffix on your 42 byf is "D", not "B". So it shouldn't have any bore gage on the barrel. Thanks for the pictures!!

02-16-2015, 03:50 AM	#253
kpf User Join Date: Oct 2012 Location: Finnøy, Norway Posts: 75 Thanks: 78 Thanked 36 Times in 10 Posts	Oh sorry, post the nr from the memory. ;-))

08-05-2016, 10:43 PM	#255
Mac Cat Lifer Lifetime Forum Patron Join Date: Apr 2015 Location: Austin, Texas Posts: 751 Thanks: 2,158 Thanked 630 Times in 340 Posts	my "42" byf S/N 2011l; no bore gauge sent PM

08-07-2016, 03:46 PM	#258
Joe Inabnett User Join Date: Jan 2008 Location: New Orleans, LA Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	Lugerdoc For your info, I also test fired the vopo replacement FP, which had a slightly different appearance than the standard mauser. It too fired consistently, but I am keeping the Mauser F.P. as more original to the 42 byf. Thanks for your help. Joe __________________ Slo Joe

09-05-2016, 02:49 AM	#259
JZ1018 New User Join Date: Aug 2015 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Serial number 3581e no bore gage

09-05-2016, 06:53 PM	#260
Tman07 User Join Date: May 2016 Location: Washington Posts: 18 Thanks: 11 Thanked 5 Times in 5 Posts	byf data I have 42 byf, 2720 L with no bore gage. Regards, Dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode