Luger cool disassemble trick - Page 2

Eugen · 05-23-2016, 07:39 PM

Alright, kurusu, I did it that way! Heck, and I have small hands, too. When I read the procedure, I thought, no way can I do that. But, I struggled with it a while and finally was able to position my hand in a way to garner some rearward torque. Voila!

Thanks for sharing and providing photos.

Having said that, it is so much easier when I'm at my shop bench to simply press the barrel down against the bench.

Olle · 05-23-2016, 10:05 PM

Quote:

Originally Posted by DonVoigt

This area is not the time or place to dis assemble your pistol,
it is too late, nothing can be done it that environment.

Better to carry two or three weapons, JMHO.

The bad thing about the Luger is that you don't want to disassemble it it the field, chances are that you will lose the side plate or the rear toggle axle...

Sergio Natali · 05-24-2016, 04:21 AM

Mario

Thanks for sharing, personally I disassemble my Lugers only a couple of times a year to clean them inside, lube them and put them back in the safe, aaaaaaaaand since I'd be an awful mechanic I usually avoid to disassemble anything far away from a wide table.

cirelaw · 05-24-2016, 11:47 AM

It works!!

Eugen · 05-27-2016, 07:55 PM

Kurusu, ok bud, it's all your fault.

I'm at my bench now and can't stop using my hands only to disassemble my two Lugers. I mean I think I've had 'em each apart at least three times now. I put them back together and do it again. This is a hoot to do.

Somebody stop me!

kurusu · 05-28-2016, 03:03 AM

Quote:

Originally Posted by eugen

kurusu, ok bud, it's all your fault.

i'm at my bench now and can't stop using my hands only to disassemble my two lugers. I mean i think i've had 'em each apart at least three times now. I put them back together and do it again. This is a hoot to do.

Somebody stop me!

Say to yourself. "I can stop whenever I want". That might work.

(Gunny alter ego) - You haven't done it often enough! Not by I long shot! Can you do it blindfolded in less than thirty seconds!!???

PS. Consider the gunny paragraph written in all caps.

05-23-2016, 07:39 PM	#21
Eugen User Join Date: Apr 2016 Location: Newburgh,IN Posts: 797 Thanks: 403 Thanked 640 Times in 339 Posts	Alright, kurusu, I did it that way! Heck, and I have small hands, too. When I read the procedure, I thought, no way can I do that. But, I struggled with it a while and finally was able to position my hand in a way to garner some rearward torque. Voila! Thanks for sharing and providing photos. Having said that, it is so much easier when I'm at my shop bench to simply press the barrel down against the bench. __________________ “God created war so that Americans would learn geography.” ― Mark Twain

05-24-2016, 04:21 AM	#23
Sergio Natali User Join Date: Feb 2013 Location: Somewhere in Northern Italy Posts: 2,646 Thanks: 1,087 Thanked 1,783 Times in 1,007 Posts	Mario Thanks for sharing, personally I disassemble my Lugers only a couple of times a year to clean them inside, lube them and put them back in the safe, aaaaaaaaand since I'd be an awful mechanic I usually avoid to disassemble anything far away from a wide table. __________________ "Originality can't be restored and should be at the top of any collector's priority list.

05-27-2016, 07:55 PM	#25
Eugen User Join Date: Apr 2016 Location: Newburgh,IN Posts: 797 Thanks: 403 Thanked 640 Times in 339 Posts	Kurusu, ok bud, it's all your fault. I'm at my bench now and can't stop using my hands only to disassemble my two Lugers. I mean I think I've had 'em each apart at least three times now. I put them back together and do it again. This is a hoot to do. Somebody stop me! __________________ “God created war so that Americans would learn geography.” ― Mark Twain

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-24-2016, 11:47 AM	#24
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,138 Times in 2,176 Posts	It works!!