new MacGar magazine

rhuff · 01-05-2016, 04:44 PM

I have had a couple of mags over the years that did not want to lock into the mag well of my Interarms Parabellums or P08 Lugers.. On examining them closely, I found a burr or incomplete cut on the hole where the mag catch enters the mag. I couple of passes with a good needle file in the mag hole solved the problem.....piece of cake!! You might want to look at your mag and see if this could be the problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-05-2016, 04:44 PM	#10
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,748 Thanked 998 Times in 733 Posts	I have had a couple of mags over the years that did not want to lock into the mag well of my Interarms Parabellums or P08 Lugers.. On examining them closely, I found a burr or incomplete cut on the hole where the mag catch enters the mag. I couple of passes with a good needle file in the mag hole solved the problem.....piece of cake!! You might want to look at your mag and see if this could be the problem.