Nambu black holster

Angus Magnus · 12-03-2015, 12:19 PM

I recently won a GB auction for a Nambu with a holster. I have not received the purchase yet but it looks like the holster is darker than usual, almost black.

Looking quickly online I read reference to a black parade holster. Is this one or has it just been darkened by time and the elements? It doesn't look to be painted after being stitched.

http://www.gunbroker.com/Auction/Vie...Item=525337921

lugerholsterrepair · 12-03-2015, 12:30 PM

Angus..Interesting! It looks as though the holster was made dark to begin with? Maybe even black as you say. When you get it in hand, open the ammunition pouch and see what color is inside? It doesn't look dyed after the holster was made...

sheepherder · 12-03-2015, 12:48 PM

Very nice, clean looking magazine body...Like it just came off the assembly line...

lugerholsterrepair · 12-03-2015, 12:53 PM

Richard..the one mag shown looks to be a reproduction? The other looks original.

Angus Magnus · 12-03-2015, 01:34 PM

Quote:

Originally Posted by lugerholsterrepair

Angus..Interesting! It looks as though the holster was made dark to begin with? Maybe even black as you say. When you get it in hand, open the ammunition pouch and see what color is inside? It doesn't look dyed after the holster was made...

I will definitely take more pictures when I have it in hand.

A quick google images search turned up no other black holsters...

sheepherder · 12-03-2015, 01:45 PM

Quote:

Originally Posted by lugerholsterrepair

Richard..the one mag shown looks to be a reproduction? The other looks original.

I could only view 4 or 5 of the pics...But the one mag body did look new but the aluminum bottom looked old...I have not seem repro Nambu mags advertised anywhere...

Angus Magnus · 12-03-2015, 01:56 PM

The black bodied one looks like this one:
http://www.gunauction.com/buy/8819888

Curious, the one in the auction is stamped "Mexico"

Sieger · 12-03-2015, 02:58 PM

Quote:

Originally Posted by sheepherder

Very nice, clean looking magazine body...Like it just came off the assembly line...

It did.

Sieger

Sieger · 12-03-2015, 03:01 PM

Quote:

Originally Posted by Angus Magnus

I recently won a GB auction for a Nambu with a holster. I have not received the purchase yet but it looks like the holster is darker than usual, almost black.

Looking quickly online I read reference to a black parade holster. Is this one or has it just been darkened by time and the elements? It doesn't look to be painted after being stitched.

http://www.gunbroker.com/Auction/Vie...Item=525337921

Hi,

This looks like a really nice early Nambu and the price was right.

Sieger

Angus Magnus · 12-03-2015, 04:10 PM

Quote:

Originally Posted by Sieger

Hi,

This looks like a really nice early Nambu and the price was right.

Sieger

It will be my first Nambu. I bid halfheartedly on a few over the years, but never took the plunge. They seem to have gone up in price of late, figured it was now or never.

This one seems to have a nice finish and the seller told me the barrel was like new. Now to order dies, new springs, and start picking up .357 sig brass at the range!

DonVoigt · 12-03-2015, 05:09 PM

I've never seen or hear of a black Nambu holster.

This one looks to me like it is just old and well oiled and deteriorated. Could have had some dye or black shoe polish added some time in its long history.

Really doesn't matter, it was "free"; you got a good deal on a nice pistol with a holster thrown it!

JMHO.

alvin · 12-03-2015, 10:16 PM

Is it an all-matching one?

Sieger · 12-04-2015, 06:55 AM

Quote:

Originally Posted by Angus Magnus

It will be my first Nambu. I bid halfheartedly on a few over the years, but never took the plunge. They seem to have gone up in price of late, figured it was now or never.

This one seems to have a nice finish and the seller told me the barrel was like new. Now to order dies, new springs, and start picking up .357 sig brass at the range!

Hi,

Using .357 Sig brass will ball-up your extractor, as it is too wide in the rim!!!

Either use brass marked for the 8mm Nambu, or have your extractor modified to take the Sig brass.

If I can recall, I think there is a "Mr. Nambu" on the net who does these modifications.

The extractors on these pistols were not made of the highest quality metal to start off with, so beware!!!

You are correct in assuming that a new spring set is a must!!!

Enjoy your Nambu, as when they are properly tuned, they are very accurate shooters!!!

Sieger

Angus Magnus · 12-04-2015, 08:03 AM

The seller said it was matching numbers. I was more interested in a nice looking shooter than a collectors piece, so it will be a nice bonus if it does match.

I did read about the rim difference. Some say that the tolerances will sometimes allow for the 357 rim. That will be determined when I have the pistol in hand. I will pick up a spare extractor to fit if needed and maybe a firing pin for shooting if the gun is matching numbers.

DonVoigt · 12-04-2015, 08:49 AM

Quote:

Originally Posted by Angus Magnus

The seller said it was matching numbers. I was more interested in a nice looking shooter than a collectors piece, so it will be a nice bonus if it does match.

I did read about the rim difference. Some say that the tolerances will sometimes allow for the 357 rim. That will be determined when I have the pistol in hand. I will pick up a spare extractor to fit if needed and maybe a firing pin for shooting if the gun is matching numbers.

Definitely a firing pin, extractor if you want- this guy makes fine reproductions of each just email Mr. Schlickmann at:
dfsjpn at aol.com

People talk a lot about "weak" extractors- I've owned/own many T 14s and never had an extractor problem- though I have seen pictures of some. I believe this problem is related to springs and ammo more than the extractor. The metal in a T 14 is just fine for its intended purpose, but 70+ years of use/abuse can take a toll.

I would also strongly recommend installing new recoil and striker springs from Wolf.

Have fun with your Nambu, but do use only 8mm nambu ammo/cartridges- .40/.357sig brass is just too big in the wrong places. Turn the rim and extractor groove to do it right.

Olle · 12-04-2015, 09:33 AM

That's a very nice score! I'm always on the lookout for nice Nambus, and it seems like you got the gun cheap and the holster for free. I just paid $660 for a minty 1945 "last ditch" T14, and I thought I got a pretty good deal on it.

I can vouch for Schlickmann's products, they are top notch. The firing pin should definitely be replaced before shooting, original Nambu firing pins are rare as hen's teeth and break easily. They are so fragile that the pistols even came with a spare pin, and the holster has a pocket just for this.

I would leave the extractor alone though, like some manuals say: "More extractors are broken during removal than in actual use". I have removed many extractors of this "snap in" type, haven't broken one yet (knock on wood) but you need to know what you're doing and it can be a pretty nerve racking procedure. Test fit some shells before you shoot, if they fit well under the extractor hook you're good to go.

Zorba · 12-04-2015, 06:29 PM

As far as the extractor goes - I was having MAJOR stovepipe issues until I removed the extractor, cleaned out all the crud underneath same, dumped some gun oil in there and re-assembled.

Not a problem since.

Ditto on the replacement springs.

12-03-2015, 12:19 PM	#1
Angus Magnus User Join Date: Jan 2012 Location: Miami Posts: 133 Thanks: 8 Thanked 22 Times in 16 Posts	Nambu black holster I recently won a GB auction for a Nambu with a holster. I have not received the purchase yet but it looks like the holster is darker than usual, almost black. Looking quickly online I read reference to a black parade holster. Is this one or has it just been darkened by time and the elements? It doesn't look to be painted after being stitched. http://www.gunbroker.com/Auction/Vie...Item=525337921

12-03-2015, 12:30 PM	#2
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Angus..Interesting! It looks as though the holster was made dark to begin with? Maybe even black as you say. When you get it in hand, open the ammunition pouch and see what color is inside? It doesn't look dyed after the holster was made... __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

12-03-2015, 12:48 PM	#3
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,197 Thanks: 1,416 Thanked 4,462 Times in 2,336 Posts	Very nice, clean looking magazine body...Like it just came off the assembly line... __________________ I like my coffee the way I like my women... ...Cold and bitter...

12-03-2015, 12:53 PM	#4
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Richard..the one mag shown looks to be a reproduction? The other looks original. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-03-2015, 01:56 PM	#7
Angus Magnus User Join Date: Jan 2012 Location: Miami Posts: 133 Thanks: 8 Thanked 22 Times in 16 Posts	The black bodied one looks like this one: http://www.gunauction.com/buy/8819888 Curious, the one in the auction is stamped "Mexico"

12-03-2015, 05:09 PM	#11
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,443 Thanked 4,355 Times in 2,041 Posts	I've never seen or hear of a black Nambu holster. This one looks to me like it is just old and well oiled and deteriorated. Could have had some dye or black shoe polish added some time in its long history. Really doesn't matter, it was "free"; you got a good deal on a nice pistol with a holster thrown it! JMHO.

12-03-2015, 10:16 PM	#12
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Is it an all-matching one?

12-04-2015, 08:03 AM	#14
Angus Magnus User Join Date: Jan 2012 Location: Miami Posts: 133 Thanks: 8 Thanked 22 Times in 16 Posts	The seller said it was matching numbers. I was more interested in a nice looking shooter than a collectors piece, so it will be a nice bonus if it does match. I did read about the rim difference. Some say that the tolerances will sometimes allow for the 357 rim. That will be determined when I have the pistol in hand. I will pick up a spare extractor to fit if needed and maybe a firing pin for shooting if the gun is matching numbers.

12-04-2015, 09:33 AM	#16
Olle User Join Date: Feb 2010 Location: Tennessee Posts: 1,149 Thanks: 159 Thanked 664 Times in 318 Posts	That's a very nice score! I'm always on the lookout for nice Nambus, and it seems like you got the gun cheap and the holster for free. I just paid $660 for a minty 1945 "last ditch" T14, and I thought I got a pretty good deal on it. I can vouch for Schlickmann's products, they are top notch. The firing pin should definitely be replaced before shooting, original Nambu firing pins are rare as hen's teeth and break easily. They are so fragile that the pistols even came with a spare pin, and the holster has a pocket just for this. I would leave the extractor alone though, like some manuals say: "More extractors are broken during removal than in actual use". I have removed many extractors of this "snap in" type, haven't broken one yet (knock on wood) but you need to know what you're doing and it can be a pretty nerve racking procedure. Test fit some shells before you shoot, if they fit well under the extractor hook you're good to go.

12-04-2015, 06:29 PM	#17
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 528 Times in 290 Posts	As far as the extractor goes - I was having MAJOR stovepipe issues until I removed the extractor, cleaned out all the crud underneath same, dumped some gun oil in there and re-assembled. Not a problem since. Ditto on the replacement springs.