Navy Luger project

ithacaartist · 07-14-2015, 01:07 PM

Thinking about that broken casting... Why not send it to be welded?

DonVoigt · 07-14-2015, 01:52 PM

Quote:

Originally Posted by ithacaartist

Thinking about that broken casting... Why not send it to be welded?

Cast metal is almost impossible to weld.
Maybe a really, really good welder could do that small a piece.

Olle · 07-14-2015, 02:29 PM

I know a welder who is an expert on TIG welding small stuff, and I think he could repair it. But like Don said, welding cast iron is an iffy procedure. I know you can weld larger parts by preheating and some other magic, but I don't think it can be done here. Even if he can make the weld stick, I'm sure it will pop off again as soon as I start filing on it. Also, this POS left a bad taste in my mouth, so I would rather throw it away. I'm going to replace the whole toggle, but I might try to make a sight from scratch later just to make the toggle assembly complete.

rhuff · 07-14-2015, 05:38 PM

I would be most proud to have your finished product residing in my safe, and making trips to the range.

07-14-2015, 01:07 PM	#1
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,378 Thanks: 7,453 Thanked 2,613 Times in 1,380 Posts	Thinking about that broken casting... Why not send it to be welded? __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-14-2015, 02:29 PM	#3
Olle User Join Date: Feb 2010 Location: Tennessee Posts: 1,149 Thanks: 159 Thanked 664 Times in 318 Posts	I know a welder who is an expert on TIG welding small stuff, and I think he could repair it. But like Don said, welding cast iron is an iffy procedure. I know you can weld larger parts by preheating and some other magic, but I don't think it can be done here. Even if he can make the weld stick, I'm sure it will pop off again as soon as I start filing on it. Also, this POS left a bad taste in my mouth, so I would rather throw it away. I'm going to replace the whole toggle, but I might try to make a sight from scratch later just to make the toggle assembly complete.

07-14-2015, 05:38 PM	#4
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,308 Thanks: 2,738 Thanked 993 Times in 729 Posts	I would be most proud to have your finished product residing in my safe, and making trips to the range.