GB Auction Luger Carbine

spacecoast · 02-26-2015, 07:11 PM

http://www.gunbroker.com/Auction/Vie...Item=470080030

No stock and quite a bit of wear on the grips, but I know very little about these.

Here are some others for comparison - http://www.simpsonltd.com/advanced_s...tion=1&x=0&y=0

The hole in the back of the receiver was likely not there to start.

Ben M. · 02-27-2015, 11:25 AM

hole is at back of frame. not receiver

sheepherder · 02-27-2015, 11:45 AM

Quote:

Originally Posted by spacecoast

Thanks for tracking it down!

Looking at pic #8 (the closeup of the hole), that is a fairly pitted area...Lanyard loop & frame area around hole...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-26-2015, 07:11 PM	#1
spacecoast User Join Date: Dec 2013 Location: FL and PA Posts: 332 Thanks: 276 Thanked 243 Times in 109 Posts	http://www.gunbroker.com/Auction/Vie...Item=470080030 No stock and quite a bit of wear on the grips, but I know very little about these. Here are some others for comparison - http://www.simpsonltd.com/advanced_s...tion=1&x=0&y=0 The hole in the back of the receiver was likely not there to start.

02-27-2015, 11:25 AM	#2
Ben M. User Join Date: Dec 2009 Location: Retired to Naples, FL. Posts: 499 Thanks: 96 Thanked 146 Times in 91 Posts	hole is at back of frame. not receiver