Uh-oh...

[hayhugh]

Well, it is not as if you were flying blind. If you follow the code supplied there is an idea of what to expect.

Older Condition Rating (1930's or older)

OA FACTORY NEW: all original parts; 100% original finish; in perfect condition in every respect.
OB EXCELLENT: all original parts; over 80% original finish; sharp lettering, numerals and design on metal; unmarred wood.
OC FINE: all original parts; over 30% original finish.
OD VERY GOOD: all original parts; none to 30% original finish.

OE GOOD: some minor replacement parts; metal smoothly rusted or lightly pitted in places, cleaned; lightly scratched, bruised or minor cracks repaired; in good working order.

OF FAIR: some major parts replaced; minor replacement parts may be required; metal rusted, may be lightly pitted all over, vigorously cleaned; rounded edges of metal and wood; principal lettering, numerals and design on metal partly obliterated; wood scratched, bruised, cracked or repaired where broken.
OG POOR: major or minor parts replaced; major replacement parts required and extensive restoration needed; metal deeply pitted; principal lettering, numerals and design obliterated, wood badly scratched, bruised, cracked or broken; mechanically inoperative; generally undesirable as a collectors firearm in its present state.

NPRF
NON-PROFESSIONALLY REFINISHED/COLD BLUE, ETC.
PRF PROFESSIONALLY REFINISHED OR RESTORED
WB WOOD IS BETTER FOR THE PERCENT OF FINISH RATING GIVEN
WW WOOD IS WORSE FOR THE PERCENT FINISH RATING GIVEN

Some items may have “dual” codes for example: all original parts; over 30% original finish but the wood is worse for the metal rating would be the code OC-WW