LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Repairs, Restoration & Refinishing

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-05-2014, 12:13 PM   #20
Lugerdoc
Patron
LugerForum
Patron
 
Lugerdoc's Avatar
 
Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 737 Times in 484 Posts
Default

R. The original DWM 7.65mm recoil springs had 17 turns vise 19 to 21 turns on the orig 9mm springs. If you are using the Wolff replacement recoil spring, hopefully you got the reduced power spring. Even then, you may have to reduce it's length to match the power of the ammo that you are using. This can be a time consuming process if you are removing one turn of the spring at a time, with reassembly and a trip to the range each time. I do have one exc original 17 turn DWM recoil spring in stock @$20 + $5 S&H, if you wish to try it. I'd also recommend that you check the movement of your extractor to make sure that it is moving normally and if the round that is jamming is an empty, also check the movement of your ejector. TH
__________________
Tom Heller POB 398 ST.Charles, MO. 63302
Tel 636-447-3006 lugerdoc@charter.net
Lugerdoc is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com