Toggle. Hold open question.

Jim Mac · 09-05-2014, 10:04 AM

Thank you for the information. I did replace the grips with a set of reprodution wooden grips that needed some fitting. I could feel the grip wanting to lift away from the frame as the magazine was inserted. I may have to do a little more sanding on it. That may explain the failure to feed also. Since I planned on shooting it, i didnt want to beat up the factory grips being that they are almost 100 years old. The factory magazine holds it open too so mayne the button on this one magazine is a little taller. Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-05-2014, 10:04 AM	#3
Jim Mac User Join Date: Oct 2011 Posts: 264 Thanks: 2 Thanked 70 Times in 37 Posts	Thank you for the information. I did replace the grips with a set of reprodution wooden grips that needed some fitting. I could feel the grip wanting to lift away from the frame as the magazine was inserted. I may have to do a little more sanding on it. That may explain the failure to feed also. Since I planned on shooting it, i didnt want to beat up the factory grips being that they are almost 100 years old. The factory magazine holds it open too so mayne the button on this one magazine is a little taller. Jim