1918 DWM with arsenal barrel re-work?

alanint · 06-24-2014, 08:52 AM

Takedown lever, Sideplate both DWM numbered with no Erfurt proofs. Upper receiver DWM proofed. There are no images of the toggle, but from the description, it is also DWM.

So far, a bunch of matching DWM parts placed on a matching number Erfurt frame with a mismatched Erfurt barrel.

The front of the frame appears ground, (see especially end of frame lug area directly above takedown lever). A good photo of the front of the frame showing the serial number would help to determine this. It looks like it was ground down and renumbered to match the balance of the parts.

This IS a strange one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-24-2014, 08:52 AM	#1
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	Takedown lever, Sideplate both DWM numbered with no Erfurt proofs. Upper receiver DWM proofed. There are no images of the toggle, but from the description, it is also DWM. So far, a bunch of matching DWM parts placed on a matching number Erfurt frame with a mismatched Erfurt barrel. The front of the frame appears ground, (see especially end of frame lug area directly above takedown lever). A good photo of the front of the frame showing the serial number would help to determine this. It looks like it was ground down and renumbered to match the balance of the parts. This IS a strange one.