1917 DWM All Matching

gfanikf · 03-29-2014, 12:25 AM

I know...well nothing about Lugers so I appreciate any and all information on this. The person wants $700 for it, but I'm trying for $600.

Is it a good buy and does it look safe to shoot?

Sorry for the lack of any really info on my end. I just know very little about Lugers besides a love of the look of them.

From the seller

Quote:

The Good: It has all the correct markings and the serial numbers match everywhere I can see (including the magazine) except for the side plate, which is unmarked. I don't know if this part was not always marked, if the number got scrubbed off or if it is a replacement part. Markings are all clear and the barrel looks fine.

The Bad: The finish is rough. Has a good deal of pitting on the gun as the pictures show.

Edward Tinker · 03-29-2014, 12:42 AM

welcome to the forum

pictures are too small to see anything and its better to post pictures here

can't tell you if its safe - the old 'have it checked by a gunsmith' is the only safe thing to say from us

most any 9mm is worth $600-$800 / depending on condition, looks, etc.

Ed

gfanikf · 03-29-2014, 12:56 AM

That's weird I had the pictures setup so they would be large ones....I'll reupload them

DavidJayUden · 03-29-2014, 05:55 AM

Even at $600, low for a Luger, I'm not all that fizzed up on it. To me, IMHO, pitting is a real deal killer, simply because, again TO ME, it makes the gun hard to look at.
I'm not saying it's not worth $600, but it is no deal of the century, to be sure.
dju

sheepherder · 03-29-2014, 07:59 AM

Quote:

Originally Posted by gfanikf

1917 DWM All Matching

Um...It says 1918 on the chamber...

I would agree on the pits being a deal killer: I'd rather have a Luger with no bluing left and no pits than a 90%+ blue and pits...

BTW: It's new to me to see the suffix on the barrel...And such a large comma on the land diameter...Not any kind of 'red flag', just new to these old eyes...

SteveM · 03-29-2014, 08:09 AM

This one's been rode really hard and put up wet..

gfanikf · 03-29-2014, 09:28 AM

Well on thing I was considering is that I can get a new barrel and just store the old one. Though cost of barrel and gunsmith work could make it the same as other shooter Lugers. My goal is really a shooter luger.I do love thay nitro blue..as little of it that remains.

Oh yeah 1918...whoops I think I was looking at a different thread title and got it mixed up.

Anyway I appreciate the advice I know German small arm's are a sea of heavy duty detail and also fake stamps, RCs, and well lots of stuff above my pay grade. Hence me seeking out advice here and two other boards.

03-29-2014, 12:42 AM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	welcome to the forum pictures are too small to see anything and its better to post pictures here can't tell you if its safe - the old 'have it checked by a gunsmith' is the only safe thing to say from us most any 9mm is worth $600-$800 / depending on condition, looks, etc. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-29-2014, 12:56 AM	#3
gfanikf New User Join Date: Mar 2014 Posts: 3 Thanks: 1 Thanked 0 Times in 0 Posts	That's weird I had the pictures setup so they would be large ones....I'll reupload them

03-29-2014, 05:55 AM	#4
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	Even at $600, low for a Luger, I'm not all that fizzed up on it. To me, IMHO, pitting is a real deal killer, simply because, again TO ME, it makes the gun hard to look at. I'm not saying it's not worth $600, but it is no deal of the century, to be sure. dju

03-29-2014, 08:09 AM	#6
SteveM User Join Date: Jun 2002 Location: Texas Posts: 1,016 Thanks: 94 Thanked 275 Times in 137 Posts	This one's been rode really hard and put up wet..

03-29-2014, 09:28 AM	#7
gfanikf New User Join Date: Mar 2014 Posts: 3 Thanks: 1 Thanked 0 Times in 0 Posts	Well on thing I was considering is that I can get a new barrel and just store the old one. Though cost of barrel and gunsmith work could make it the same as other shooter Lugers. My goal is really a shooter luger.I do love thay nitro blue..as little of it that remains. Oh yeah 1918...whoops I think I was looking at a different thread title and got it mixed up. Anyway I appreciate the advice I know German small arm's are a sea of heavy duty detail and also fake stamps, RCs, and well lots of stuff above my pay grade. Hence me seeking out advice here and two other boards.