Mainspring testing

Sieger · 03-18-2014, 12:30 AM

Hi,

It sound to me like you are well on the way to tuning up your Luger!!

Just wait until you have a super accurate handload developed for it, then the real fun will start!

To be at full battery, the toggle must be, firmly, all of the way down, and; thus, the breach block all of the way forward.

For proper function, you will need: a proper recoil spring; a proper magazine spring; a proper extractor spring and a properly handloaded cartridge, including proper O.A.L..

Good luck with your project!!!

Sieger

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-18-2014, 12:30 AM	#1
Sieger User Join Date: Jul 2003 Location: New York, NY Posts: 1,579 Thanks: 2,144 Thanked 402 Times in 251 Posts	Hi, It sound to me like you are well on the way to tuning up your Luger!! Just wait until you have a super accurate handload developed for it, then the real fun will start! To be at full battery, the toggle must be, firmly, all of the way down, and; thus, the breach block all of the way forward. For proper function, you will need: a proper recoil spring; a proper magazine spring; a proper extractor spring and a properly handloaded cartridge, including proper O.A.L.. Good luck with your project!!! Sieger