9mm/7.65 parts

lfid · 02-01-2014, 10:41 PM

seems like you could test the barrel/receiver to toggle asy with go/no-go gauges

but beware that the excess looseness / wear in some toggles asy / connecting pins may create some misleading variation in the correct headspace measurement

like :
http://www.brownells.com/gunsmith-to...prod25181.aspx

note the breechblock damage on sample at the top view picture - a 30 cal example! ( slide magnify to max )
http://www.simpsonltd.com/product_in...ducts_id=31706

happy trails
Bill

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-01-2014, 10:41 PM	#6
lfid Lifer Lifetime Forum Patron Join Date: Sep 2006 Location: Wichita, KS USA Posts: 453 Thanks: 573 Thanked 96 Times in 53 Posts	seems like you could test the barrel/receiver to toggle asy with go/no-go gauges but beware that the excess looseness / wear in some toggles asy / connecting pins may create some misleading variation in the correct headspace measurement like : http://www.brownells.com/gunsmith-to...prod25181.aspx note the breechblock damage on sample at the top view picture - a 30 cal example! ( slide magnify to max ) http://www.simpsonltd.com/product_in...ducts_id=31706 happy trails Bill