8mm Nambu Cartridge Conversion

[sheepherder]

I mentioned a Lyman [cast] bullet #32362 referenced in the Handloaders Manual Of Cartridge Conversions as being suitable for the 8mm Nambu, sized to .321". I emailed Lyman about this bullet, as I couldn't find anyone who stocked it. Here's their replies -

We have only made bullet moulds. We have not sold the bullets themselves.

Unfortunately this mould has been discontinued for many years. It was last made in the 70's as a limited production item.

I don't cast...

Sieger mentioned that Nambu extractors are hard to find when they break or 'spring'. Don Schlickman makes new ones...Don had this to say -

I do make extractors but usually have the customer send me the bolt for me to install the extractor, there is no charge for this. There are to many differences in the dove tail cut dimensions that they may not be interchangeable so I can't guarantee the fit otherwise

[Sieger]

Originally Posted by sheepherder

I mentioned a Lyman [cast] bullet #32362 referenced in the Handloaders Manual Of Cartridge Conversions as being suitable for the 8mm Nambu, sized to .321". I emailed Lyman about this bullet, as I couldn't find anyone who stocked it. Here's their replies -

We have only made bullet moulds. We have not sold the bullets themselves.

Unfortunately this mould has been discontinued for many years. It was last made in the 70's as a limited production item.

I don't cast...

Sieger mentioned that Nambu extractors are hard to find when they break or 'spring'. Don Schlickman makes new ones...Don had this to say -

I do make extractors but usually have the customer send me the bolt for me to install the extractor, there is no charge for this. There are to many differences in the dove tail cut dimensions that they may not be interchangeable so I can't guarantee the fit otherwise

Hi,

Do you have contact information for him, telephone, website, etc., as I have two items I think he can help me with.

Thanks!


Sieger

[sheepherder]

Originally Posted by Sieger

Hi,

Do you have contact information for him, telephone, website, etc., as I have two items I think he can help me with.

Thanks!


Sieger

I always make my live links in red.

[sheepherder]

I thought I had posted this link earlier, but I don't see it...It is a thread from surplusrifle.com on making 8mm Nambu brass from 357 Sig cases...

357sig brass to 8mm Nambu

357 Sig hasn't made it to my area yet, evidently...Neither of my local gun shops have any ammunition or pistols in that caliber...

[Sieger]

Originally Posted by sheepherder

I always make my live links in red.

Hi,

More specifically, does he have a website?

Thanks!


Sieger