![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
![]() |
#4 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,775
Thanks: 4,995
Thanked 3,133 Times in 1,439 Posts
|
![]()
Matt..Welcome to the Forum! This, I am positive, is due to rust. Why? Can you see a great deal of rust somewhere?
David gives good advice..removing the top is relatively easy, even for a noviceOnce the top cannon is off the frame the toggle pin can be removed allowing the toggle/bolt to slide back & out. This will let you look closely at the insides. I don't encourage taking the left grip off (the one on the safety lever side of the gun or you may experience the $1000 chip) Well..as long as you are a tad careful this left wooden grip should not present any problems. IF the chip happens it was likely broken during firing and just hung on like a loose tooth. I take out the magazine, stick a finger inside and gently push the backside up and away from the pistol frame. Just be gentle.
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) ![]() "For those who Fight For It, Life has a flavor the protected will never know." |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|