P08 Not returning to battery

rhuff · 09-12-2013, 05:45 PM

As has been mentioned above, the first thing that needs to be done is to remove the grips VERY carefully(refer to the sticky) and break the pistol down for a very good cleaning/inspection followed by a good lube. This includes the mags also. If it were my Luger, I would try it with the original springs first, and if there was a problem, then evaluate the mag and springs. Do NOT shoot +P, +P+, or NATO ammo in this Luger. Winchester WB or PMC 115gr FMJ works in most Luger. I would not try reloads at this point(I also am a reloader). Let us know how things work out.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-12-2013, 05:45 PM	#1
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,750 Thanked 999 Times in 734 Posts	As has been mentioned above, the first thing that needs to be done is to remove the grips VERY carefully(refer to the sticky) and break the pistol down for a very good cleaning/inspection followed by a good lube. This includes the mags also. If it were my Luger, I would try it with the original springs first, and if there was a problem, then evaluate the mag and springs. Do NOT shoot +P, +P+, or NATO ammo in this Luger. Winchester WB or PMC 115gr FMJ works in most Luger. I would not try reloads at this point(I also am a reloader). Let us know how things work out.