43 Krieghoff pricing (ball park) info sought

[lugerholsterrepair]

Gary..There is no number on the fireing pin or the finreing pin retainer or hold open device.

Is there any markings on these? Eagle 2? Is the firing pin fluted? Have you looked at the sides or the underside of the hold open?

Is the serial # between 11.300 and 11.800?

Is the barrel and frame serialed?

Is the underneath of the sideplate serialed with last 2-3 digits?

Is the lever on the inside plate Eagle2?

Is the extension of the sideplate numbered last 2-3 digits? and Eagle 2?

RIA can have very fanciful descriptions..Not often accurate. Most of the 9MM Lugers for the Luftwaffe went to AA crews. Officers did not carry many although there were noteable exceptions as you indicate!

[mystical_tutor]

Originally Posted by lugerholsterrepair

Gary..There is no number on the fireing pin or the finreing pin retainer or hold open device.

Is there any markings on these? Eagle 2? Is the firing pin fluted? Have you looked at the sides or the underside of the hold open?

Good point Jerry, I did not remove the hold open or the sear to see if there were numbers in unseen locations. Hate doing anything with those leaf springs.

The fireing pin is fluted and I did not see any proofs on it or the retainer.

Also, is it normal to have a strawed take down lever on these? Seems like most everything had gone to bluing by this time.
Oh, and another question, the SN on the take down lever, though it matches, is on the upper side of it so it can not be seen when the gun is assembled. I don't recall seeing that before--but this is the only Krieghoff I have owned.

Gary

[mystical_tutor]

Originally Posted by lugerholsterrepair

Gary..There is no number on the fireing pin or the finreing pin retainer or hold open device.

Is there any markings on these? Eagle 2? Is the firing pin fluted? Have you looked at the sides or the underside of the hold open?

Is the serial # between 11.300 and 11.800?

Is the barrel and frame serialed?

Is the underneath of the sideplate serialed with last 2-3 digits?

Is the lever on the inside plate Eagle2?

Is the extension of the sideplate numbered last 2-3 digits? and Eagle 2?

Jerry; I missed this post. It popped into the thread above a post I made and i didn't notice it till today. sorry for the delay in answering.

Yes to all the above except #1 The FP is fluted and there are no proofs on the pin or retainer, the HOD is proofed.

Thanks

Gary