jammed luger

DavidJayUden · 06-03-2013, 05:45 PM

I dunno, but take the upper off the lower, then take out the rear toggle pin. It will all be open and certainly the problem will be obvious.
Check YouTube for disassembly videos if you are not certain.
dju

hoosiermike · 06-03-2013, 08:45 PM

I took your advice and field stripped it. The fired casing fell right out as expected. I could not see anything damaged or broken. I reassembled and work the toggle several times. Somewhere around pull 5 or 6 it locked up again. Same thing. The toggle would only come back somewhere around 3/8" and then a hard stop. I field stripped her and reassembled her again and no problems. I probably worked the action another 50 times without a problem. Im scratching my head. But at least I didnt find a broken part.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-03-2013, 05:45 PM	#1
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	I dunno, but take the upper off the lower, then take out the rear toggle pin. It will all be open and certainly the problem will be obvious. Check YouTube for disassembly videos if you are not certain. dju

06-03-2013, 08:45 PM	#2
hoosiermike User Join Date: Jun 2013 Location: Southern Indiana Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	I took your advice and field stripped it. The fired casing fell right out as expected. I could not see anything damaged or broken. I reassembled and work the toggle several times. Somewhere around pull 5 or 6 it locked up again. Same thing. The toggle would only come back somewhere around 3/8" and then a hard stop. I field stripped her and reassembled her again and no problems. I probably worked the action another 50 times without a problem. Im scratching my head. But at least I didnt find a broken part.