OK...suggestions for barrel lengths??

lfid · 04-16-2013, 03:42 AM

Hi GT,

as a secondary design - that could use same simplified machine setup/program as a tapered barrel - perhaps also a 5" or 5.25" length in bull barrel format with crowned muzzle 9mm - seems it would be an easy derivative of the tapered typical factory profile

could be max constant external diameter that will allow clearance with the internal frame rails or at least same diameter as the standard barrel flange diameter at slide mount face

no front sight to allow further customizations with user selected sight options or perhaps front sight as customer order or use with side mount laser or scope

good luck and thanks !!! for working this barrel project
Bill

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-16-2013, 03:42 AM	#7
lfid Lifer Lifetime Forum Patron Join Date: Sep 2006 Location: Wichita, KS USA Posts: 453 Thanks: 573 Thanked 96 Times in 53 Posts	Hi GT, as a secondary design - that could use same simplified machine setup/program as a tapered barrel - perhaps also a 5" or 5.25" length in bull barrel format with crowned muzzle 9mm - seems it would be an easy derivative of the tapered typical factory profile could be max constant external diameter that will allow clearance with the internal frame rails or at least same diameter as the standard barrel flange diameter at slide mount face no front sight to allow further customizations with user selected sight options or perhaps front sight as customer order or use with side mount laser or scope good luck and thanks !!! for working this barrel project Bill