Worth $500.00? - Page 2

Curly1 · 03-30-2013, 12:52 AM

Possible worn sear.

lugersrkewl · 03-30-2013, 02:21 AM

Everything looks pretty clean , check the plunger in the front under the sideplate like alanint said. I woudnt think the firing pin is stuck and slam firing. You paid 250.00 I would say you have plenty of room to work with maybe you could ship it lugerdoc on this forum and have him get it squared away.

workonwood · 03-30-2013, 02:59 PM

Should the firing pin always bet out of the end of the sear?

lugersrkewl · 03-30-2013, 03:04 PM

Come again?

rhuff · 03-30-2013, 03:23 PM

My first guess is that the sear/firing pin interface is worn, or BUBBA has "fixed" it!! Perhaps someone tried to do a trigger job, and things went bad. With the toggle train out of the pistol, and the firing pin assy in place, the tip of the firing pin will protrude through the firing pin hole on the breachface....that is normal.

ithacaartist · 03-31-2013, 05:37 PM

David, you could try checking for firing pin spring tension when the breech block is in battery. Read one of the stickies about de-c0cking the pistol...to get a sense of what you're feeling for, how far back to draw the toggle knobs, etc. Feel for it, and if you still have tension from the firing pin spring after the action has been cycled, then I'd say you likely have the sear/firing pin lug problem, as Richard suggests above.

03-30-2013, 12:52 AM	#1
Curly1 User Join Date: Oct 2005 Location: Upstate New York Posts: 1,255 Thanks: 126 Thanked 717 Times in 374 Posts	Possible worn sear. __________________ Laugh hard and often. Gary

03-31-2013, 05:37 PM	#6
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,400 Thanks: 7,555 Thanked 2,643 Times in 1,393 Posts	David, you could try checking for firing pin spring tension when the breech block is in battery. Read one of the stickies about de-c0cking the pistol...to get a sense of what you're feeling for, how far back to draw the toggle knobs, etc. Feel for it, and if you still have tension from the firing pin spring after the action has been cycled, then I'd say you likely have the sear/firing pin lug problem, as Richard suggests above. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-30-2013, 02:21 AM	#2
lugersrkewl Patron LugerForum Patron Join Date: Feb 2012 Location: Ussr Posts: 425 Thanks: 198 Thanked 75 Times in 58 Posts	Everything looks pretty clean , check the plunger in the front under the sideplate like alanint said. I woudnt think the firing pin is stuck and slam firing. You paid 250.00 I would say you have plenty of room to work with maybe you could ship it lugerdoc on this forum and have him get it squared away.

03-30-2013, 02:59 PM	#3
workonwood User Join Date: Mar 2013 Location: Bellingham Wa Posts: 14 Thanks: 0 Thanked 2 Times in 1 Post	Should the firing pin always bet out of the end of the sear?

03-30-2013, 03:04 PM	#4
lugersrkewl Patron LugerForum Patron Join Date: Feb 2012 Location: Ussr Posts: 425 Thanks: 198 Thanked 75 Times in 58 Posts	Come again?

03-30-2013, 03:23 PM	#5
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,314 Thanks: 2,746 Thanked 998 Times in 733 Posts	My first guess is that the sear/firing pin interface is worn, or BUBBA has "fixed" it!! Perhaps someone tried to do a trigger job, and things went bad. With the toggle train out of the pistol, and the firing pin assy in place, the tip of the firing pin will protrude through the firing pin hole on the breachface....that is normal.