Screws for stock iron

sheepherder · 03-21-2013, 09:20 AM

IMHO, if it were me, I would buy Patrice's set for his asking price, send them to Evans and ask him to make a set (and take dimensions), and recoup my investment with the copy (or copies).

This would allow you to replace your screws and provide future restorers a place to get accurate reproductions.

Kitkat041836 · 03-21-2013, 10:08 AM

All I have to say is get the right screws for your stock iron,I would not buy a stock that had the wrong stock iron screws.
If you drill out the stock iron and rethread the holes you have
destroyed the stock iron.
Thanks,George

03-21-2013, 09:20 AM	#1
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,208 Thanks: 1,425 Thanked 4,474 Times in 2,343 Posts	IMHO, if it were me, I would buy Patrice's set for his asking price, send them to Evans and ask him to make a set (and take dimensions), and recoup my investment with the copy (or copies). This would allow you to replace your screws and provide future restorers a place to get accurate reproductions. __________________ I like my coffee the way I like my women... ...Cold and bitter...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-21-2013, 10:08 AM	#2
Kitkat041836 RIP Join Date: Feb 2009 Posts: 195 Thanks: 0 Thanked 21 Times in 18 Posts	All I have to say is get the right screws for your stock iron,I would not buy a stock that had the wrong stock iron screws. If you drill out the stock iron and rethread the holes you have destroyed the stock iron. Thanks,George