Sig Sauer P6 9mm hammer

GySgt1811 · 03-12-2013, 05:36 PM

Padredan,

I, too, have a P6. I love it. It is my "Social Work" pistol residing in my bedstand and the car as appropriate. And, it, too, has the hammer cut. First, it is machined, not hacksawed.

I have been told by several sources that the P6, when issued and carried by the West German police, had a safety-sealed plastic tie that was installed in the slot in the hammer and through the trigger guard behind the trigger. This was a police administration feature to insure by a visual inspection that the gun had not been fired nor the slide racked. I do not know if the safety tie had a pull tab that broke the seal or if the seal could be broken by trigger pull (double action, Sig-Sauer) or slide racking alone. I do not know if the P6 was carried with a round in the chamber. All this was to insure that if the seal was broken the police officer better have a good reason.

Additionally, I have the original issue holster that came with mine. What a circus! In order to draw the pistol two snaps have to be undone and each is swept in a different direction. I guess a West German police draw was a thought-ahead thing.

It seems that all this rig-a-marole was for safety and accountability. Safe to say, my holster stays the the safe and the plastic ties stay on the bread loaf.

However, It is my most dependable pistol; I love it.

Regards,

Gunny John

GySgt1811 · 03-13-2013, 07:46 PM

Quote:

Originally Posted by postino

Just looking at the pic of Dan's Sig, it looks like any tie would slip right out of the slot if routed as described...

You're right. Thanks for pointing that out. I tried to put a tie on mine in the way that was described to me. It slipped off. I wonder if the "tie" was somehow applied different than than I understood?

One description I have read was that the "seal tie" (for want of a better word) went through the trigger guard behind the trigger, crossed over the top of the slide and thence through the slot in the hammer.

I wonder if any of our older (West) German members might remember any of this?

In any case, My and Dan's P6 is an outstanding defensive tool.

Regards,

Gunny John

PS. Interesting idea about the "drop" test. Yet more to the mystery behind the hammer cut.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-12-2013, 05:36 PM	#1
GySgt1811 Patron LugerForum Patron Join Date: Feb 2012 Location: Southern Indiana Posts: 237 Thanks: 1,238 Thanked 126 Times in 84 Posts	Padredan, I, too, have a P6. I love it. It is my "Social Work" pistol residing in my bedstand and the car as appropriate. And, it, too, has the hammer cut. First, it is machined, not hacksawed. I have been told by several sources that the P6, when issued and carried by the West German police, had a safety-sealed plastic tie that was installed in the slot in the hammer and through the trigger guard behind the trigger. This was a police administration feature to insure by a visual inspection that the gun had not been fired nor the slide racked. I do not know if the safety tie had a pull tab that broke the seal or if the seal could be broken by trigger pull (double action, Sig-Sauer) or slide racking alone. I do not know if the P6 was carried with a round in the chamber. All this was to insure that if the seal was broken the police officer better have a good reason. Additionally, I have the original issue holster that came with mine. What a circus! In order to draw the pistol two snaps have to be undone and each is swept in a different direction. I guess a West German police draw was a thought-ahead thing. It seems that all this rig-a-marole was for safety and accountability. Safe to say, my holster stays the the safe and the plastic ties stay on the bread loaf. However, It is my most dependable pistol; I love it. Regards, Gunny John