1900 AE Luger

aldo35 · 02-10-2013, 09:59 PM

Hi,

Is the front sight ramp on a 30 cal 1900 AE Luger a separate piece dovetailed into the barrel or a integral piece machined with the barrel?

Aldo35

Edward Tinker · 02-10-2013, 10:59 PM

I would have to look.

I moved this to the new collector area instead of the technical help area.

Ron Wood · 02-11-2013, 12:38 AM

It is machined integral with the barrel, as are all Lugers.

aldo35 · 02-11-2013, 09:26 PM

Ed,

I bought the pistol, an engraved nickel plated 1900 AE sold by Capt Willard and posted 2/01 on this sight. I haven't received the pistol yet but his pictures on that thread are quite good. I would appreciate your comments.

I have looked at several 30cal AE Lugers up for auction on GB and they all seem to have the high ramp as opposed to the ramp one sees on a 9mm.

I plan on restoring this pistol as I have all the missing parts except the ramp. I think it will be a nice shooter.

Aldo35

Ron Wood · 02-11-2013, 10:28 PM

Do not replace the ramp on a 1900. It is not the same as a 9mm. The ramp (sight block) has to be higher to elevate the sight to the same height above the bore axis as a 9mm...i.e. small bore (7.65mm) tall base, large bore (9mm) short base.

aldo35 · 02-12-2013, 08:06 AM

Hi,

I was thinking of having a sight block made and silver soldered to barrel. Can you provide me with the dimensions?

Thank you for your response.

Aldo35

02-10-2013, 09:59 PM	#1
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 390 Thanks: 2,298 Thanked 184 Times in 91 Posts	1900 AE Luger Hi, Is the front sight ramp on a 30 cal 1900 AE Luger a separate piece dovetailed into the barrel or a integral piece machined with the barrel? Aldo35

02-11-2013, 12:38 AM	#3
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,040 Thanks: 1,106 Thanked 5,257 Times in 1,724 Posts	It is machined integral with the barrel, as are all Lugers. __________________ If it's made after 1918...it's a reproduction

02-11-2013, 10:28 PM	#5
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,040 Thanks: 1,106 Thanked 5,257 Times in 1,724 Posts	Do not replace the ramp on a 1900. It is not the same as a 9mm. The ramp (sight block) has to be higher to elevate the sight to the same height above the bore axis as a 9mm...i.e. small bore (7.65mm) tall base, large bore (9mm) short base. __________________ If it's made after 1918...it's a reproduction

02-12-2013, 08:06 AM	#6
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 390 Thanks: 2,298 Thanked 184 Times in 91 Posts	AE Sight Block Hi, I was thinking of having a sight block made and silver soldered to barrel. Can you provide me with the dimensions? Thank you for your response. Aldo35

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-10-2013, 10:59 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,967 Thanks: 2,066 Thanked 4,596 Times in 2,117 Posts	I would have to look. I moved this to the new collector area instead of the technical help area.

02-11-2013, 09:26 PM	#4
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 390 Thanks: 2,298 Thanked 184 Times in 91 Posts	Ed, I bought the pistol, an engraved nickel plated 1900 AE sold by Capt Willard and posted 2/01 on this sight. I haven't received the pistol yet but his pictures on that thread are quite good. I would appreciate your comments. I have looked at several 30cal AE Lugers up for auction on GB and they all seem to have the high ramp as opposed to the ramp one sees on a 9mm. I plan on restoring this pistol as I have all the missing parts except the ramp. I think it will be a nice shooter. Aldo35