DWM 1908 Commercial

Lugerdoc · 01-23-2013, 12:46 PM

Per our phoncon this morning: You do have the short M1908 type frame (no provision for a grip safety spring), but difficult to tell if it was was altered since it appears to have a plug pinned into the bottom of the recoil spring area, which is not normal and may have been added if the grip safety inlet was removed from a M1906 frame. The serial number could be correct for either type frame. I doubt that DWM would have done it this way. Even though your barrel is matching to the frame, the 7.65x120mm barrel is VERY unusual on a true M1908. Your barrel appear very dark blue and high polished (it could just be the lighting) but may have been refinished. THis would be a very unique example, if FACTORY original. TH

01-23-2013, 12:46 PM	#10
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Per our phoncon this morning: You do have the short M1908 type frame (no provision for a grip safety spring), but difficult to tell if it was was altered since it appears to have a plug pinned into the bottom of the recoil spring area, which is not normal and may have been added if the grip safety inlet was removed from a M1906 frame. The serial number could be correct for either type frame. I doubt that DWM would have done it this way. Even though your barrel is matching to the frame, the 7.65x120mm barrel is VERY unusual on a true M1908. Your barrel appear very dark blue and high polished (it could just be the lighting) but may have been refinished. THis would be a very unique example, if FACTORY original. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode