Luger will not fire until the trigger is pulled twice.

Lugerdoc · 10-21-2012, 10:15 AM

Sounds like a classic case of the disconnector not pushing under the trigger lever on the first try. There are many possible solutions: increasing the angle on the top part of lever, heating lever to bend slightly outward or first checking that disconnector spring is strong enough. TH

ithacaartist · 10-21-2012, 03:15 PM

Quote:

Originally Posted by Lugerdoc

Sounds like a classic case of the disconnector not pushing under the trigger lever on the first try. There are many possible solutions: increasing the angle on the top part of lever, heating lever to bend slightly outward or first checking that disconnector spring is strong enough. TH

Don't forget heating this part in order to change its shape/angle will necessitate heat treating again afterwards to reestablish its temper!

10-21-2012, 10:15 AM	#1
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Sounds like a classic case of the disconnector not pushing under the trigger lever on the first try. There are many possible solutions: increasing the angle on the top part of lever, heating lever to bend slightly outward or first checking that disconnector spring is strong enough. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode