S/42 Load Hornady 124 gr XTP with VV340

[rhuff]

I think that if your chamber/leade, and mags will tolerate 1.160-1.175 OAL, then you should be in the zone. I am sure that you know that Lugers do not like real soft loads, so if you are going to start with the starting load from Lymans, I would only load 10 or so rounds, so you don't have a bunch to disassemble for the components. Most of my Lugers want the loads to be near the upper end for reliable functioning. Of course, that depends on what springs are in you guns. Good luck, and keep us informed.