Extraction trouble

Sieger · 03-17-2012, 03:15 AM

Hi:

You probably have an extractor spring that is weak with age and needs replacing. This is an easy two minute operation. Lugerdoc probably has the necessary spring for you.

Pierced primers are real Luger killers, as the high pressure slams your firing pin back against its retainer, eventually causing failure of the breach block!!!

I'd avoid any ammo with such problems. How is your firing pin strike on your WWB primers?

Sieger

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-17-2012, 03:15 AM	#15
Sieger User Join Date: Jul 2003 Location: New York, NY Posts: 1,579 Thanks: 2,154 Thanked 402 Times in 251 Posts	Hi: You probably have an extractor spring that is weak with age and needs replacing. This is an easy two minute operation. Lugerdoc probably has the necessary spring for you. Pierced primers are real Luger killers, as the high pressure slams your firing pin back against its retainer, eventually causing failure of the breach block!!! I'd avoid any ammo with such problems. How is your firing pin strike on your WWB primers? Sieger