P08 Trigger Problem

kmichaels90 · 03-07-2012, 11:20 AM

You very likely have 3 p08's like my p08 which does not have a last shot hold open. What I mean is make sure it is cocked, then remove the sideplate and slide the upper assembly (barrel,receiver,toggle assembly) off the front of the frame. Now push on the sear bar toward the barrel end and see if it releases the firing pin. If so I think you have an issue with your sideplate. If it doest release I'd say the issue is with the sear bar or firing pin.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-07-2012, 11:20 AM	#13
kmichaels90 User Join Date: Mar 2012 Location: Bucyrus OH Posts: 60 Thanks: 1 Thanked 7 Times in 7 Posts	You very likely have 3 p08's like my p08 which does not have a last shot hold open. What I mean is make sure it is cocked, then remove the sideplate and slide the upper assembly (barrel,receiver,toggle assembly) off the front of the frame. Now push on the sear bar toward the barrel end and see if it releases the firing pin. If so I think you have an issue with your sideplate. If it doest release I'd say the issue is with the sear bar or firing pin.