Luger won't fire.

dz · 12-23-2011, 04:58 PM

Remove the receiver and barrel and reassemble frame with sideplate installed, then press trigger and see if lever on sideplate moves enough to engage. David

Bertiii · 12-23-2011, 05:23 PM

I already cleaned out all of the grime from the trigger and the problem still exists. I installed the side plate with the barrel half off and it seems that the trigger lever is not moving out far enough with the trigger pressed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-23-2011, 04:58 PM	#1
dz Patron LugerForum Patron Join Date: May 2004 Posts: 261 Thanks: 1 Thanked 56 Times in 40 Posts	Remove the receiver and barrel and reassemble frame with sideplate installed, then press trigger and see if lever on sideplate moves enough to engage. David

12-23-2011, 05:23 PM	#2
Bertiii User Join Date: Jul 2011 Posts: 7 Thanks: 10 Thanked 0 Times in 0 Posts	I already cleaned out all of the grime from the trigger and the problem still exists. I installed the side plate with the barrel half off and it seems that the trigger lever is not moving out far enough with the trigger pressed.