Mark D's Luger Rust Blue Solution and Refinishing Tips Article

markbritt · 12-02-2011, 10:11 AM

Bill:

I will comment about the bore. After carding, I do run a brush down the bore several times to clean out any debris, carded dust, etc. I never had an issue with the rust bluing causing issues to the rifling.

MarkD

Olle · 12-02-2011, 03:07 PM

Excellent write-up, and thanks for sharing the results of your experiments! I have also been frustrated with all those old formulas and thinking that "surely enough there's a better way", so the information about the sodium nitrate is greatly appreciated!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-02-2011, 10:11 AM	#1
markbritt User Join Date: Oct 2009 Location: NW Indiana Posts: 240 Thanks: 5 Thanked 48 Times in 22 Posts	Bill: I will comment about the bore. After carding, I do run a brush down the bore several times to clean out any debris, carded dust, etc. I never had an issue with the rust bluing causing issues to the rifling. MarkD

12-02-2011, 03:07 PM	#2
Olle User Join Date: Feb 2010 Location: Tennessee Posts: 1,149 Thanks: 159 Thanked 664 Times in 318 Posts	Excellent write-up, and thanks for sharing the results of your experiments! I have also been frustrated with all those old formulas and thinking that "surely enough there's a better way", so the information about the sodium nitrate is greatly appreciated!