What is a 'good' trigger pull?

HisSoldier · 11-05-2011, 07:25 PM

I found a sticky "Cocking problem?", that must be it.

Michael Zeleny · 11-05-2011, 07:55 PM

The official Swiss military trigger tuning procedure eliminated slack by adjusting the angle of an annealed trigger linkage lever with a special tool, heat-treating it afterwards. I have the tool, but not the instructions for its use. Note that, unlike its predecessors, the P06/29 exposes its trigger linkage via a cut in the sideplate. The Swiss Luger armorer's manual also contains instructions on stoning the sear for optimal engagement. My National Match W+F 06/29 Lugers appear to have been tuned accordingly.

11-05-2011, 07:25 PM	#1
HisSoldier User Join Date: Aug 2007 Location: Oregon Coast Posts: 95 Thanks: 1 Thanked 14 Times in 10 Posts	I found a sticky "Cocking problem?", that must be it. __________________ The fear of the Lord is the beginning of wisdom

11-05-2011, 07:55 PM	#2
Michael Zeleny Patron LugerForum Patron Join Date: Jul 2003 Location: Los Angeles Posts: 525 Thanks: 129 Thanked 139 Times in 76 Posts	The official Swiss military trigger tuning procedure eliminated slack by adjusting the angle of an annealed trigger linkage lever with a special tool, heat-treating it afterwards. I have the tool, but not the instructions for its use. Note that, unlike its predecessors, the P06/29 exposes its trigger linkage via a cut in the sideplate. The Swiss Luger armorer's manual also contains instructions on stoning the sear for optimal engagement. My National Match W+F 06/29 Lugers appear to have been tuned accordingly. __________________ Michael Zeleny@post.harvard.edu -- http://larvatus.livejournal.com/ -- 7576 Willow Glen Road, Los Angeles, CA 90046 -- 323.363.1860 All of old. Nothing else ever. Ever tried. Ever failed. No matter. Try again. Fail again. Fail better. -- Samuel Beckett

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode