I'm having a fireing problem.

mrerick · 04-01-2011, 10:04 PM

Hi George,

Welcome to the forum!

This could very well be the recoil spring, since the wrong one or a weak one could account for this.

It could also be the way you're holding and supporting the pistol when firing.

You need a tight grip, straight on without bending your wrist.

Lugers can be rather sensitive to the grip.

This could also be lubrication related. Have you cleaned and inspected it?

Incomplete closure could be caused by the extractor being gummed up and dirty. If you disassemble the breech block don't lose the small spring under the extractor and observe the way it's inserted and mounted.

Inspect the face of the extractor. It should be smooth and slightly curved.

Marc

04-01-2011, 10:04 PM	#2
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,925 Thanks: 1,377 Thanked 3,139 Times in 1,520 Posts	Hi George, Welcome to the forum! This could very well be the recoil spring, since the wrong one or a weak one could account for this. It could also be the way you're holding and supporting the pistol when firing. You need a tight grip, straight on without bending your wrist. Lugers can be rather sensitive to the grip. This could also be lubrication related. Have you cleaned and inspected it? Incomplete closure could be caused by the extractor being gummed up and dirty. If you disassemble the breech block don't lose the small spring under the extractor and observe the way it's inserted and mounted. Inspect the face of the extractor. It should be smooth and slightly curved. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode